Cnc Vertical Machining Center With Gear Box Fh1580L

Product Details

Big torque CNC vertical milling machine FH1580L standard with BT50 spindle.
A gearbox is optional for increasing the torque, is the most important characteristic for determining the cutting performance of a spindle. Increasing spindle torque for a high-speed machining center ultimately affects not only the choice of the spindle but also the design of the machine.
Therefore, how to deliver more torque is an important challenge. This characteristic directly affects the material removal rate because it determines the amount of force that can be applied to the cut. Spindle motors are often characterized in terms of their power, but this number by itself says little about cutting performance. Power is the product of torque and speed, so a high-power spindle motor might combine high speed with a low amount of torque at that speed. Also, the maximum power might not be available at the maximum speed. In either of these cases, the high-power motor might be relatively small. But the amount of torque that can be achieved is proportional to the size of the motor.

Product Features

C-frame structure
X/Y/Z axis travel: 1500/800/700mm
BT50 spindle
Optional for the bear box to increase the torque
All linear guideways for enhanced rigidity and accuracy
Optional for HPC function.
Large capacity side-mount tool changer

Product Parameters

规格/机型 Parameter/Model		FH1580L
精度 Accuracy	定位精度 Positioning accuracy	0.01mm
精度 Accuracy	重复定位精度 Repeat positioning accuracy	0.005mm
工作台 Worktable	工作台尺寸 Worktable size	1500*800mm
	T型槽 T-slot size	6T-18-125mm
	最大工作负重 Max. load	3000kg
加工范围 Travel	X/Y/Z轴行程 X/Y/Z axis travel	1500800700mm
	主轴鼻端至工作台面距离 Spindle nose to worktable	110-810mm
	主轴中心至立柱距离 Spindle center to Column	850mm
进给 Feed	快速进给 G00 Max. feeding speed G00	20-20-15m/min
	切削进给 G01 Max. working speed G01	8m/min
	X/Y/Z轴电机功率 X/Y/Z axis motor power	4.4/4.4/4.4kw
主轴 Spindle	连接方式 Drive type	直连式 Direct type
	主轴功率 Spindle motor power	18.5-22kw
	主轴最高转速 Spindle Max. speed	6000rpm
	刀具规格 Tool holder	BT50
刀库（选配） Tool Magazine(Opt.)	刀库类型 ATC type	刀臂式刀库 Arm type
刀库（选配） Tool Magazine(Opt.)	刀库容量 ATC capacity	24pcs
通用参数 Common	工作电压及总容量 Power supply and total capacity	3P/380V/50Hz/40KVA
	机床重量 Machine weight	12000kg
	外形尺寸 Dimension	400030003200mm
主要部件 Main parts	系统 Controller	新代 21MA/台湾 Syntec 21MA/Taiwan
	交流伺服电机（驱动） AC servo motor(Driver)	安川/日本 Yaskawa/Japan
	主轴变频器 Spindle inverter	汇川/中国 Inovance/China
	导轨（滑块数量） Guide way	45(6/8/6) 上银，银泰/台湾 45(6/8/6) Hiwin,PMI/Taiwan
	丝杠 Ball screw	5012 上银，银泰/台湾 5012 Hiwin,PMI/Taiwan
	电子手轮 Electronic hand-wheel	EHDW-BA5S-1 远瞻/台湾 EHDW-BA5S-1 Future/Taiwan
	润滑系统 Lubrication system	YET-A2P2 裕祥精机/台湾 YET-A2P2 ISHAN/Taiwan
	油冷机 Oil Coolant Chiller	帕森托尔/中国 Parsonthor/China
	空调 Air conditioner	EA-6AP 帕森托尔/中国 EA-6AP Parsonthor/China
	内部排屑器 Chip conveyor	内置螺旋排屑 Inside screw-type

Application and After-Sales Service

The warranty period is 12 months. Not including man-made damage, improper use, and wear parts.
Within the warranty period, if parts with high prices need to be repaired or replaced, we can ship the part to the customer after receiving the old part. Freight costs and all customs fees should be paid by the customer.
After the warranty period, we promise lifelong maintenance. But the customer should buy the parts and pay for all costs arising, therefore.

Production Process

production process